Opticol GL OSD is a sterile, preservative-free, clear, viscoelastic product that forms a protective film on the cornea. Opticol GL OSD contains sodium hyaluronate, the sodium salt of hyaluronic acid which, due to its physical properties, forms a uniform, continuous and long-lasting film that protects the epithelial layer of the eye without impairing vision.

Opticol GL OSD provides long-lasting relief from discomfort associated with:

• Mechanical stress, caused for example by wearing hard or soft contact lenses, or during ophthalmic diagnostic interventions.
• Conditions of environmental stress caused, in particular, by the action of air conditioning, wind, cold, dryness or air pollution caused, for example, by cigarette smoke.
• Visual stress caused by intensive use of vision due, for example, to the use of computers, microscopes or during prolonged use of motor vehicles.

Opticol GL OSD, preservative-free solution, is well tolerated in long-term use.

Opticol GL OSD is suitable for contact lens wearers. It is not necessary to remove contact lenses while applying the product.

Application mode

• To open the vial, remove the safety ring by pulling it by its end until it is completely removed.
• Remove the cover by pulling it upwards.
• Tilt your head back slightly, look up and gently pull your lower lid away from your eye. Hold the bottle upside down and apply one drop to the conjunctival sac of the eye, using firm and prolonged pressure, 3 to 5 times a day.
• Close the eye slowly to allow even distribution of the fluid on the surface of the eye.
• Do not touch the dropper end of the bottle to your eye or hands.
• Any residual drop left on the dropper tip should be removed by tapping the bottom of the bottle.
• Close the bottle by lightly pressing the lid.

The special sterile filtration system of the dropper bottle requires that, after applying each drop, wait a few seconds without pressing the bottle so that the air can flow again. Without this waiting period, it will be difficult to apply additional drops. Also due to this physical mechanism, it is necessary to apply more pressure as the bottle empties.

Composition

1 ml contains: sodium hyaluronate 0.3%, sodium chloride, sodium citrate, citric acid, water for injections.

Presentation

10 ml bottle.

Warnings and precautions for use

• Do not use this product if the cap lock ring is broken or if the bottle is damaged.
• Do not touch the dropper end of the bottle to the eye.
• Do not use this product if you are allergic to any of the ingredients.
• If you are using other eye drops/ophthalmic ointment at the same time, wait approximately 15 minutes between applying each product. Opticol GL OSD should be administered last.
• Do not use Opticol GL OSD in case of eye infection or injury.
• The sharpness of vision may be temporarily reduced after application; do not drive or use machines until your vision returns to normal.
• Do not use this solution after the expiry date which is stated on the bottle and carton.
• After first opening, use within 12 months.
• Due to the special and innovative sterile filtration system present in the dripper, a small amount of solution will always remain in the bottle.

conservation conditions

• Store between 2ºC and 25ºC. Do not freeze.
• Close the bottle with the cap after each use.
• Store the vial in the outer carton in order to protect from light.